Successfully resolved the issue of container sling edge deterioration

When you encounter the problem of the rotten edge of the container sling, the following solutions can be adopted:

Ⅰ.Assess the extent of edge decay

• First of all, the extent of the rotten edges needs to be assessed. If the edge is relatively slight, only the edge wear or rough edge, may not affect the overall load-bearing capacity of the sling. However, if the rotten edge is so severe that it has affected the structural integrity of the sling, it needs to be handled more carefull 

Ⅱ.Repair or replace the loops

• Minor edge repair:

If the frayed edge is only slightly frayed or raw, try using thread of the same material as the sling for mending or reinforcing. When repairing, pay attention to the tidiness of the stitches and stitches to ensure that the appearance and performance of the repaired sling are as close as possible to the original state.

You can also consider using a professional burr removal device, such as an ultrasonic burr removal device, to treat burrs and uneven parts of the sling edge.

• Severe edge replacement:

If the rotten edge is serious, it has affected the load-bearing capacity or structural integrity of the sling, then a new sling needs to be replaced in time. In the replacement, the sling should be selected with reliable quality and in line with standards to ensure the overall safety and load-bearing capacity of the container bag.

Ⅲ.Inspect and enhance the usage conditions

• Check the use environment:

        Check whether the use environment of the container bag has factors that lead to the edge of the sling, such as sharp objects, corrosive substances, etc. If these factors exist, measures should be taken to improve or avoid them.

• Optimized use:

       Avoid overuse or improper use of container bags, such as overload loading, frequent lifting, etc. These behaviors will accelerate the wear and aging of the sling.

      During lifting and transporting, ensure that the suspender is evenly stressed to avoid improper operations such as cabling and twisting.

Ⅳ.Reinforce routine maintenance and inspection procedures

• Regular inspection:

        Regular inspection of container bags and their straps to detect and deal with potential problems in a timely manner. Check the wear of the sling and whether the connection is firm.

• Maintenance:

Carry out necessary maintenance of container bags, such as cleaning, moisture-proof, sun protection, etc. These measures can extend the service life of container bags and their slings.

Ⅴ.Opt for professional and trustworthy manufacturers

When purchasing container bags, you should choose a professional, reliable and qualified manufacturer. The quality of the container bags produced by these manufacturers is more guaranteed, which can reduce the problems such as the rotten edge of the sling caused by quality problems.

To sum up, dealing with the problem of the rotten edge of the JUMBO bagsling requires comprehensive consideration of the degree of rotten edge, the necessity of repairing or replacing the sling, the optimization of the conditions of use, and the daily maintenance and inspection. By adopting reasonable measures and methods, the problem of rotten edge of the container sling can be effectively solved to ensure the overall safety and service life of the container bag.